Enter tranquility !!!

The ideal pH level is between 7.2 – 7.6. At these levels ensures safety of the users, optimal chemical efficiency and protection of spa equipment. SPA PH PLUS is a granular alkali used for raising the pH if it falls below 7.2.

SPA TA PLUS is a fine, rapid dissolving powder used for increasing the Total Alkalinity of your spa water. Apply when total alkalinity falls below 80mg/l (ppm) and then maintain the total alkalinity within the desired range of 80 – 150mg/l (ppm).

Spa Complete Starter Kit – Chlorine is a handy kit providing a comprehensive range of essential spa treatment chemicals with additional maintenance products. The kit includes: 500g Chlorine Granules, 750g pH Minus, 500g pH Plus, 500g T.A. Plus, 2 x Spa Fusion, Spa Immerse & 3 Way Test Strips.

The product has been designed to remove the grease and oils that build-up on the filter cartridge and can lead to impaired filtration. For best results, use on a monthly basis. Apply the 100g sachet to a clean bucket containing clean water to form a highly effective filter cleaning solution and leave the cartridge to soak for a minimum of 8 hours. For best results, allow the cartridge filter to dry before putting them back in place.

Use Instant Filter Cleaner as part of a regular cleaning routine for your filter cartridges. The product will rapidly remove grease and oil from the filter cartridges. Apply to the filter and rinse the cartridge thoroughly with fresh water after cleaning.

The Multifunctional 20g Chlorine Tablets are a popular, widely used chlorine sanitiser for spas. The slow eroding nature of these tablets allows them to maintain recommended chlorine levels over a longer period of time compared with chlorine granules. These tablets also contain clarifier helping to achieve crystal clear water. Always dose via a Small Floating Chlorine Tablet Dispenser.

Bromine Tablets are a popular alternative to chlorine sanitisers. Dosed via a floating dispenser, these slow dissolving tablets maintain the recommended sanitiser level over a period of 3-5 days.

Is the ultimate product for regular oxidation of spa water. Supplied in a convenient 35g one-treatment sachet, destroys bather wastes, whilst a built in clarifier helps to achieve sparkling clear water. To apply, simply cut the corner of the sachet and add directly to the spa water. One 35g sachet treats up to 1,500 liters of water.

SPA FoamAway is a fast acting liquid used to prevent and destroy unsightly foam on the surface of the spa water. When added directly to the spa water, this product quickly breaks foam down which is generally created by detergents, skin lotions and cosmetics.

Sparkle is a clarifier in liquid form that is used to make spa water look crystal clear. Sparkle is added directly to the spa water with the pump running. Once applied it collects small particles and binds them together making larger particles that are much easier for the filter to remove.